EasyManua.ls Logo

Hioki DT4282 - Page 102

Hioki DT4282
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96
General Specications
Power supply
Batteries AA size alkaline (LR6) battery or AA size manganese
(R6) battery x 4
Rated power supply
voltage
1.5 V DC × 4
Maximum rated
power supply
voltage
6.8 V
Maximum rated
power
0.5 VA (max) supply voltage 6.0 V, Continuity
measurement, Input short circuit, Backlight on
Rated power 0.2 VA (typ) supply voltage 6.0 V, DCV measurement,
Input short circuit, Backlight off
Power during OFF/
APS
0.1 mVA (max) supply voltage 6.0 V
Continuous
operating time
(Representative value:
DCV function)
(Using new battery)
AA size
battery
Backlight
off on
Alkaline Approx. 100 hours Approx. 30 hours
Manganese Approx. 30 hours Approx. 10 hours
Withstand voltage
Between all measurement terminals and case: 8.54 kV AC
(sine wave, 50 Hz/60 Hz, 60 seconds)
Maximum rated
voltage between
terminals
Between the V and COM terminals: 1000 V DC/AC
or 2 × 10
7
V • Hz (whichever is the lower value.)
Maximum rated
current between
terminals
Between the μA/mA and COM terminals: 600 mA
DC/600 mA AC
Between the A and COM terminals: 10 A DC/10 A AC
(continuous)
Maximum rated
voltage between
measurement
terminals and
ground
1000 V (Measurement category III)
600 V (Measurement category IV)
Anticipated transient overvoltage: 8000 V
HIOKI DT4281A981-08

Table of Contents

Other manuals for Hioki DT4282

Related product manuals