20
Parts Names and Functions
Rear
Communication port
When the communication
adapter supplied with the optional
DT4900-01 Communication
Package is connected, the data
can be transmitted to the PC.
(p. 72)
Stand
The instrument can be set on the
stand. (p. 31)
Test lead holder
The test lead can be held.
Battery cover
When replacing the batteries
(p. 26) or fuse (p. 106), remove
the cover.
See p. 26.
Strap hole
The optional Z5004 or Z5020
Magnetic Strap can be attached.
(p. 31)
Serial number label
It is necessary for production
control such as product
warranty.
Do not peel off the label.
To Next Page
Loading...
