Parameter AC configuration general parameters
ID The unique ID (serial number) of the managed device. All discovered
devices which are choosable will be shown by using a double click at
this field.
Description The short description of the managed device
Hostname The hostname of the managed device
Maintainer The maintainer of the managed device
Parameter AC configuration service parameters - HTTP
HTTP status Enables or disables HTTP for the managed device
HTTP port The HTTP port for the AP3400
Parameter AC configuration service parameters - HTTPS
HTTPS status Enables or disables HTTPS for the managed device
HTTPS port The HTTPS port for the AP3400
HTTPS certificate Adds the possibility to generate the certificate for the AP3400
Parameter AC configuration service parameters - GUI
Status Enables or disables the GUI functionality
Parameter AC configuration service parameters - SSH
SSH status Enables or disables SSH for the managed device
SSH port The SSH port for the AP3400
Parameter AC configuration interface parameters
IP mode Selects the IP mode for the managed device. By using the option
’DHCP IPv4’ the managed devices will obtain a IP address from the
DHCP server. ’Static’ means the AP3400 will use the IP address and
netmask given by the parameters below.
Address The IP address which the AP3400 shall use
Netmask The netmask which the AP3400 shall use
NB1601 185 User Manual for NRSW version 4.8.0.103
To Next Page
Loading...
