Parameter AC configuration user parameters
Username The username used for the managed device
Password The password used for the managed device
Parameter AC configuration WLAN parameters
Administrative status Enables or disabled the given radio of the AP3400
Operation mode The operation mode for the seleted radio module of the AP3400. Re-
mark only ’Access Point’ mode is currently supported
Country Select the country the AP operates in
Operation type Specifies the desired IEEE 802.11 operation mode
Radio band Selects the radio band to be used for connections, depending on your
module it could be 2.4 or 5 GHz
Bandwidth Specify the channel bandwidth operation mode
Channel Specifies the channel to be used
Tx power Specifies the max. transmit power used in dBm.
Profile IDs The profiles (see section profiles) which the AP3400 should use
Profiles
With the NetModule Access Controller it is possible to configure up to 10 different profiles. With each
profile it is possible to configure an independent SSID with encryption and VLAN.
NB1601 186 User Manual for NRSW version 4.8.0.103
To Next Page
Loading...
