6.7.20. Hotspot
This section can be used to set up a hotspot (Based on coova chilli) service providing a captive portal
on the router, which redirects any connecting client to a landing page before internet access will be
granted.
Parameter Hotspot basic
Name Name of the captive portal
Interface The Interface who is attributed
Address Chosen IP-Address
Mode Describes the selected mode
Administration
Parameter Hotspot administration parameters
Status Enable/disable the captive portal
Interface Choose the attributed interface
Network Network address
Netmask Netmask
Local address The local IP address
Portal name The Name of the Portal
Logging If enabled the Hotspot instance will show more logging
Parameter Landing Page
Status Status and editing possibility of the portal, if pre defined portal is in-
stalled or other
Upload Upload custom landing page
Download Download installed default landing page
Advanced
Two operational modes are available. The terms-only service (ToS) mode shows a Terms of Service
page and the user has to accept these terms before getting access to the Internet. The second mode
is for using an RADIUS configuration, which requires an external RADIUS server. In this mode the
user is getting an captive portal web page with user login and password field before he can reach the
Internet.
NB1601 189 User Manual for NRSW version 4.8.0.103
To Next Page
Loading...
