EasyManua.ls Logo

Hirschmann NetModule NB1601 - Page 190

Hirschmann NetModule NB1601
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter Advanced parameters
Operational Mode Terms-only Service or RADIUS configuration used, see details on fol-
lowing tables
Access local interfaces If selected, the user can reach services which are connected on a
local interface of the router
DHCP start DHCP range for connected clients, starting at 2
DHCP end DHCP range for connected clients, ending at 254
Parameter Terms-only Service
Bandwidth Limitation Down This option limits the bandwidth (upload / download) of each user/de-
vice which is connected and authenticated to the Hotspot interface.
Bandwidth Limitation Up see "Bandwidth Limitation Down"
Traffic Limitation With this option it is possible to limit the data consumption per user/-
client. After reaching the given traffic limitation the user/client will be
redirected to the login page again.
Inactivity Timeout If a station does not send anything within this timeout the user will be
automatically logged out
Session Timeout Set the maximum session time in seconds. Default session timeout
0, means unlimited time.The client will be logout after the session
timeout is reached. was reached.
Parameter RADIUS configuration
Primary RADIUS server The IP address of primary radius server
Secondary RADIUS server The IP address of secondary radius server
Shared Secret Radius shared secret for both servers
Authentication Port The UDP port number to use for radius authentication requests (de-
fault 1812)
Accounting Port The UDP port number to use for radius accounting requests (default
1813)
Accounting Interval This interval specifies in which seconds the Hotspot process will re-
port accounting information to the radius server. Default interim-
interval for RADIUS accounting unless otherwise set by RADIUS (de-
faults to 0, meaning unlimited)
Account external traffic only If enabled the Hotspot process will report external traffic only. This
means the internal traffic like Walled Garden traffic will be ignored
Account SSID If enabled the Hotspot process will append the MAC of the RADIUS
Called Station ID with the SSID of the current WLAN interface sepa-
rated by a colon.
NB1601 190 User Manual for NRSW version 4.8.0.103

Table of Contents

Related product manuals