EasyManua.ls Logo

Hirschmann PowerMICE - Page 100

Hirschmann PowerMICE
308 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Assistance in the Protection from Un-
authorized Access
100
6.4
Restricted Management Access
UM Basic Configuration L3P
Release
7.1
12/2011
network mgmt-access modify 2
ip 192.168.1.0
Set the IP address of the entry for the IT network.
network mgmt-access modify 2
netmask 255.255.255.0
Set the netmask of the entry for the IT network.
network mgmt-access modify 2
telnet disable
Deactivate telnet for the entry of the IT network.
network mgmt-access modify 2
ssh disable
Deactivate SSH for the entry of the IT network.
network mgmt-access add Create an entry for the mobile phone network. In
the example, this is given the ID 3.
network mgmt-access modify 3
ip 109.237.176.0
Set the IP address of the entry for the mobile
phone network.
network mgmt-access modify 3
netmask 255.255.255.0
Set the netmask of the entry for the mobile phone
network.
network mgmt-access modify 3
http disable
Deactivate http for the entry of the mobile phone
network.
network mgmt-access modify 3
snmp disable
Deactivate snmp for the entry of the mobile phone
network.
network mgmt-access modify 3
telnet disable
Deactivate telnet for the entry of the mobile phone
network.
network mgmt-access status 1
disable
Deactivate the preset entry.
network mgmt-access
operation enable
Activate the function immediately.
show network mgmt-access Display the current configuration of the function.
copy system:running-config
nvram:startup-config
Save the entire configuration in the non-volatile
memory.

Table of Contents

Other manuals for Hirschmann PowerMICE

Related product manuals