Operation Diagnosis
212
9.1
Sending Traps
UM Basic Configuration L3P
Release
7.1
12/2011
9.1.2 SNMP Traps during Boot
The device sends the ColdStart trap every time it boots.
hmConfigurationChangedT
rap
this is sent if you change the configuration of the device after
saving locally for the first time.
hmAddressRelearnDetectT
rap
this is sent if Address Relearn Detection is active and the relearn
threshold for MAC addresses on different ports is exceeded. This
process indicates high probability of a loop situation on the
network.
hmDuplexMismatchTrap this is sent if the device detects a possible problem with duplex
mode on a port.
hmTrapRebootOnError this is sent if the device detects an error which is to be corrected
by a cold start.
Trap name Meaning
Table 25: Possible traps
To Next Page
Loading...
