EtherNet/IP
256
10.2
EtherNet/IP Parameters
UM Basic Configuration L3P
Release
7.1
12/2011
10.2.2 TCP/IP Interface Object
The switch supports an instance (instance 1) of the TCP/IP Interface Object
(Class Code F5
H
, 245) of EtherNet/IP.
In the case of write access, the switch stores the complete configuration in
its flash memory. Saving can take 10 seconds. If the save process is
interrupted, for example, by a power cut, the switch may become inoperable.
Note: The switch replies to the configuration change "Set Request” with a
"Response” although saving of the configuration has not yet been completed.
To Next Page
Loading...
