Hirschmann PowerMICE - RSTP Bridge Object

EtherNet/IP
264
10.2 EtherNet/IP Parameters
UM Basic Configuration L3P
Release 7.1 12/2011
10.2.5 RSTP Bridge Object
For the device TCSESM-E.
RSTP is a layer 2 protocol that enables the use of a redundant Ethernet
topology (e.g., a ring topology). RSTP is specified in Chapter 17 of
IEEE 802.1D-2004.
The switch supports the Hirschmann-specific RSTP Bridge Object (class
code 64
H,
100) for the switch configuration and information parameters.
The device supports 2 instances:
 Instance 1 represents the bridge‘s primary RSTP instance, and
 instance 2 represents the secondary (Dual) RSTP instance.
You will find further information on these parameters and how to set them in
the “GUI” (Graphical User Interface / Web-based Interface) reference
manual.