Hirschmann PowerMICE - Setting IGMP Snooping

Network Load Control
156
8.2 Multicast Application
UM Basic Configuration L3P
Release 7.1 12/2011
8.2.4 Setting IGMP Snooping
 Operation
 Settings for IGMP Querier and IGMP
With these frames you can enter global settings for the IGMP settings and
the IGMP Querier function.
Prerequisite: The IGMP Snooping function is activated globally.
 Select the Switching:Multicast:IGMP dialog.
The “Operation” frame allows you to enable/disable IGMP Snooping
globally for the entire device.
If IGMP Snooping is disabled, then
 the device does not evaluate Query and Report packets received,
and
 it sends (floods) received data packets with a Multicast address as
the destination address to all ports.