Hirschmann PowerMICE User Manual

Network Load Control
164
8.2 Multicast Application
UM Basic Configuration L3P
Release 7.1 12/2011
Note: If the device is incorporated into a HIPER-Ring, you can use the
following settings to quickly reconfigure the network for data packets
with registered Multicast destination addresses after the ring is
switched:
 Activate GMRP on the ring ports and globally, and
 activate “Forward all groups” on the ring ports.
Figure 35: Multicasts dialog

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English