Entering the IP Parameters
26
UM Basic Configuration L3P
Release
7.1
12/2011
Configuration via DHCP Option 82.
You choose this “in-band” method if you want to configure the installed
device using DHCP Option 82. You need a DHCP server with Option 82
for this. The DHCP server assigns the configuration data to the device
using its physical connection (see page 49 “System Configuration via
DHCP Option 82”).
Configuration via the Web-based interface.
If the device already has an IP address and can be reached via the
network, then the Web-based interface provides you with another option
for configuring the IP parameters.
To Next Page
Loading...
Need help?
General
