Hirschmann PowerMICE User Manual

EtherNet/IP
UM Basic Configuration L3P
Release 7.1 12/2011
10.2 EtherNet/IP Parameters
267
Id Attribute Access
rule
Data type Description
1 Port Identifier
Priority
Set UDINT Range: 0 to 240 in steps of 16, default: 128
(refer to IEEE, 802.1D-2004, § 17.13.10).
2 mcheck Set BOOL True (1), False (2)
(refer to IEEE 802.1D-2004, §17.19.13 and
dot1dStpPortProtocolMigration in RFC 4318).
3 Port Path Cost Set UDINT Range: 1 to 200,00,000, default:auto (0)
(refer to IEEE 802.1D-2004, §17.13.11 and
dot1dStpPortAdminPathCost in RFC 4318).
4 Port Admin Edge
Port
Set BOOL True (1), False (2)
(refer to IEEE 802.1D-2004, §17.13.1 and
dot1dStpPortAdminEdgePort in RFC 4318).
5 Port Oper Edge
Port
Get BOOL True (1), False (2)
(refer to dot1dStpPortOperEdgePort in
RFC 4318).
6Port Admin
PointToPoint
Set UINT forceTrue (0), forceFalse (1), auto (2)
(refer to dot1dStpPortAdminPointToPoint in
RFC 4318).
7 Port Oper
PointToPoint
Get UINT True (1), False (2)
(refer to dot1dStpPortOperPointToPoint in
RFC 4318).
8 Port Enable Set UINT Enabled (1), Disabled (2)
(Refer to dot1dStpPortEnable in RFC 4188).
9 Port State Get UINT Disabled (1), Blocking (2), Listening (3),
Learning (4), Forwarding (5), Broken (6)
(refer to dot1dStpPortState in RFC 4188).
10 Port Role Get UNT Unknown (0), Alternate/Backup (1), Root (2),
Designated (3)
(refer to dot1dStpTopChanges in RFC 4188).
100 DRSTP Get UINT Hirschmann-specific object. True (1), False (2).
Table 38: Hirschmann RSTP Port Object

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English