Hirschmann PowerMICE User Manual

Contents
UM Basic Configuration L3P
Release 7.1 12/2011
5
6.8.1 Description of prioritizing with ACLs 110
6.8.2 Description of IP-based ACLs 111
6.8.3 Description of MAC-based ACLs 112
6.8.4 Configuring IP ACLs 114
6.8.5 Configuring MAC ACLs 116
6.8.6 Configuring Priorities with IP ACLs 117
6.8.7 Specifying the Sequence of the Rules 119
7 Synchronizing the System Time in the Network 121
7.1 Entering the Time 122
7.2 SNTP 125
7.2.1 Description of SNTP 125
7.2.2 Preparing the SNTP Configuration 126
7.2.3 Configuring SNTP 127
7.3 Precision Time Protocol 131
7.3.1 Description of PTP Functions 131
7.3.2 Preparing the PTP Configuration 137
7.3.3 Application Example 139
7.4 Interaction of PTP and SNTP 145
8 Network Load Control 147
8.1 Direct Packet Distribution 148
8.1.1 Store-and-forward 148
8.1.2 Multi-Address Capability 149
8.1.3 Aging of Learned Addresses 149
8.1.4 Entering Static Addresses 150
8.1.5 Disabling the Direct Packet Distribution 152
8.2 Multicast Application 153
8.2.1 Description of the Multicast Application 153
8.2.2 Example of a Multicast Application 154
8.2.3 Description of IGMP Snooping 155
8.2.4 Setting IGMP Snooping 156
8.2.5 Description of GMRP 162
8.2.6 Setting GMRP 163
8.3 Rate Limiter 165
8.3.1 Description of the Rate Limiter 165
8.3.2 Load limiter settings (PowerMICE and MACH 4000) 166
8.3.3 Load limiter settings 166
8.4 QoS/Priority 168
8.4.1 Description of Prioritization 168
8.4.2 VLAN tagging 169
8.4.3 IP ToS / DiffServ 171

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English