Loading/saving settings
UM Basic Configuration L3P
Release
7.1
12/2011
3.1
Loading settings
59
Example of loading from a tftp server
Before downloading a file from the tftp server, you have to save the
configuration file in the corresponding path of the tftp servers with
the file name, e.g. switch/switch_01.cfg (see on page 66
“Saving in a binary file or a script file on a URL”).
In the “URL” line, enter the path of the tftp server, e.g. tftp://
10.1.112.214/switch/switch_01.cfg.
Figure 17: Load/Save dialog
enable Switch to the privileged EXEC mode.
copy tftp://10.1.112.159/
switch/config.dat
nvram:startup-config
The device loads the configuration data from a
tftp server in the connected network.
To Next Page
Loading...
