Operation
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 16/57
qSCALE i2 Cranes (Tool Version 3.0.34) Operators Manual / Issue B / 11-2017 / ac.
3 Operation
This chapter contains information, advice and instructions for using the console.
You will also find the description of function elements, functions and menus.
After correct adjustment of the RCL to the current setup status of the machine the RCL is ready for
use.
The machine operator must be familiar with all operating elements of the RCL before commencing
machine operation.
All settings must be checked by hoisting a known load and comparing the information with that
displayed by the RCL.
WARNING
Imminent threat of personal injury and damage to property due to incorrect system settings!
The correct adjustment of the RCL to the current set-up status is essential for the correct
function of the system and of the machine.
The correctness of these settings must be guaranteed before starting the machine opera-
tions!
To Next Page
Loading...