Operation
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 21/57
qSCALE i2 Cranes (Tool Version 3.0.34) Operators Manual / Issue B / 11-2017 / ac.
3.2 System Event Messages
The qSCALE i2 system includes a comprehensive database of system event and error messages.
Section 5.2 includes an Error Codes Table.
3.2.1 Indication of an Event Message
If necessary, a code ‘# ####’ is displayed at the marked location on the display. If several event
messages are simultaneously present, only the most important will be displayed here.
3.2.2 Event Classes
The leading digit of an event code indicates the event class.
Depending on the importance of the message they are divided into different classes:
To Next Page
Loading...
Need help?
General