Appendix
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 47/57
qSCALE i2 Cranes (Tool Version 3.0.34) Operators Manual / Issue B / 11-2017 / ac.
Connector X1.1 Molex CMC, 48 pin
Connector CAN 1 Connector M12, 5-pin, female, A-coded, according to EN 61076-2-101
Programming with qSCALE i2 Crane Configurator Tool
CE-Compliance EU Directive 2004/108/EC (EMC) according to
EN 61000-6-2: 2005, EN 61000-6-4: 2007
Protection Level IP 6k6 and IP67 according to ISO 20653: Road Vehicles – Degrees of
protection (IP-Code) – Protection of electrical equipment against foreign
objects, water and access
Climate Requirements According to ISO 16750-4: Road Vehicles – Environmental conditions and
testing for electrical and electronic equipment – Climatic Loads
Operating Temperature Range: -40 … +75°C
Storage Temperature Range: -40 … +85°C
ISO 15003: Agricultural Engineering – Electrical and electronic equipment
– Testing resistance to environmental conditions
To Next Page
Loading...