Hitachi F-4700 - Page 80

3 - 15
[Reference]
 Auto parameter setting (fixed)
<Sensitivity>
Wavelength scan (acquisition of signal intensity)
 EX and EM Slits : Both 10 nm
 EX WL : 350 nm
 EM WL : Raman peak wavelength
 Response : 2 s
 Scan speed : 60 nm/min
 PMT Voltage : 700 V
Time scan (acquisition of noise level)
 EX and EM Slits : Both 10 nm
 EX WL : 350 nm
 EM WL : Raman peak wavelength
 Response : 4 s
 Scan time : 600 s
 PMT Voltage : 700 V
<Sensitivity [BG]>
Condition setting Wavelength scan
 EX and EM Slits : Both 10 nm
 EX WL : 350 nm
 EM WL : Peak WL of Raman
 Response : 4 s
 Speed : 60 nm/min
 PMT Voltage : 700 V