All methods stored in the instrument and available for use will be visible. 3.4.1.1.
Select the correct method, then tap to accept the input and return to the 3.4.1.2.
Method menu.
Name the sample (if Sample Naming is active in the pull-down menu). 3.4.2.
Remove the glass cover from the sample port and insert a secondary safety window, if 3.4.3.
there is not one already installed. For instructions on secondary safety window
assembly, see Section 2.6.3.5.
Hitachi High-Tech Analytical Science
▶
17
To Next Page
Loading...
