Installation, Relocation, and After-sales Technical Service
IMPORTANT-4
Installation, Relocation, and After-sales Technical Service
(1) Installation and Relocation
(a) The customer must not install the instrument.
To ensure the safety and high accuracy operation of instrument, Hitachi High-Tech
Corporation service engineer who is trained and qualified by Hitachi High-Tech will
carry out the installation.
(b) Before installation of this instrument, the user is requested to make preparations
and to notify the sales or service engineer of Hitachi High-Tech Corporation for
satisfying the installation requirements according to this manual.
(c) When relocation of this instrument becomes necessary after initial installation
(delivery), please notify the sales or service engineer of Hitachi High-Tech
Corporation to avoid possible troubles due to relocation. (Relocation service will be
provided on a chargeable basis.)
(2) After-sales Service
(a) For after-sales technical service, contact the sales or service representative of
Hitachi High-Tech Corporation.
(b) After the warranty period, maintenance, inspection, etc. are available through a
contract.
(c) For 10 years after the delivery, its maintenance can be provided to ensure operation
of the instrument.
Even when more than 10 years have elapsed after delivery, maintenance will
basically be provided as long as the relevant units and parts are available. Note,
however, that this statement does not represent any extension of the
above-mentioned useful life of the instrument.
Disposal of Instrument
In the present design, this instrument does not use materials that would directly cause
environmental disruption. Note, however, that the environmental protection laws and
directives may be revised or amended. Therefore, be sure to consult with the sales or service
engineer of Hitachi High-Tech Corporation when planning disposal of this instrument or its
parts.
Lithium batteries are used in the Turbo molecular pump and the personal computer of this
instrument. Therefore, please contact our service engineers of Hitachi High-Tech Corporation
whether lithium batteries are used in your dry pump.. When disposing of the lithium batteries,
strictly follow the relevant laws and regulations regarding industrial waste disposal and
environmental protection.
Insulating oil is used in the HV tank of this instrument. When disposing of the insulating oil,
strictly follow the laws and regulations regarding industrial waste disposal and environmental
protection.
To Next Page
Loading...
