EasyManua.ls Logo

Hitachi SU8700 - Disposal of Cooling Water Circulator (Option); Service Life of Instrument; Technical Seminars and Training for Customers

Hitachi SU8700
440 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Disposal of Cooling Water Circulator (Option)
IMPORTANT-5
IMPORTANT
Disposal of Cooling Water Circulator (Option)
In an arrangement where a cooling water circulator is provided for this instrument, check
whether the cooling water circulator is categorized as a class-1 specific product that uses a
chlorofluorocarbon coolant (CFC, flon) indicated in the law regarding implementation of
recovery and destruction of CFCs for particular products(CFC recovery-destruction law).
Regarding disposal of the class-1 specific product, it is required to refer disposal servicing to a
class-1 CFC recovery agentregistered with the authorities concerned.
For disposal, contact our sales or service represent
Disposal of Ion Pump (IP) Backup Power Supply (Option)
The Ion pump (IP) backup power supply uses lead-acid batteries. For disposal, contact our
sales or service representative
Service Life of Instrument
This instrument has a service life of 10 years after the date of its initial use (installation), which
is estimated under the condition that periodic maintenance/checkup, replacement of
life-limited parts, and repair of worn parts are carried out as specified in this instruction
manual. When more than the service life have elapes after delivery, perform the safety
check-up by our sales or service representative of Hitachi High-Tech Corporation (with
charge). In case of operating the insturument after elapes of service life, it can cause of
malfuction of instrument and risk of safety. Please note that safety check-up is unable to
perform due to operating condition or instrument installation condition.
In addition, purchasing a new instument may need to consider due to the result of the safety
check-up.
Technical Seminars and Training for Customers
To ensure safety and high accuracy in operation of the instrument, technical seminars and
training courses are available at Hitachi High-Tech Corporation's facilities or your site. For
further information, contact the sales representative of Hitachi High-Tech Corporation. (The
technical seminars and customer training courses are available on a chargeable basis.)

Table of Contents

Related product manuals