HITEC Flash 8 User Manual

50 51
Dual Rates cont.
8. When changing only “L/U” (Left/Up) servo movement,
use the jog dial to select “L/U” (Left/Up) and press to
conrm the selection.
9. Rotate jog dial to increase (clockwise) or decrease
(counter-clockwise) the servo movement. “L/U” setting is
to x the direction of the servo from neutral position for
aileron or rudder, and the maximum amount of up/down
movement for aileron is indicated in percentage.
Please check the maximum movement angle of the selected
direction and then pres jog dial to conrm the changes.
10. When changing only “R/D” (Right/Down) servo movement,
use the jog dial to select “R/D” (Right/Down) and press to
conrm the selection.
11. Rotate jog dial to increase (clockwise) or decrease
(counter-clockwise) the servo movement. “R/D” setting
is to x the direction of the servo from neutral position
for aileron or rudder, and the maximum amount of up/down
movement for aileron is indicated in percentage.
Please check the maximum movement angle of the selected
direction and then pres jog dial to conrm the changes.
12. Press the back button twice to return to the D/R & EXP menu.
Exponential Rate
13. Scroll to highlight the “EXP” eld and press the jog dial to
activate the menu.
14. When changing both “L/U” (Left/Up) “R/D (Right/Down)
simultaneously, press the button once again.
15. With using the jog dial, you may increase (clockwise) or
decrease (counter-clockwise) the sensitivity near the neutral
position. “L/U” “R/D” setting is to x the direction of the
servo from neutral position for aileron or rudder
(to left or right direction), and the maximum amount of
up/down movement for aileron is indicated in percentage.
Please check the sensitivity of the selected direction and
then pres jog dial to conrm the changes.
16. When changing only “L/U” (Left/Up) sensitivity, use the
jog dial to select “L/U” (Left/Up) and press to conrm the
selection.
17. With using the jog dial, you may increase (clockwise) or
decrease (counter-clockwise) the sensitivity near the neutral
position. “L/U” setting is to x the direction of the servo from
neutral position for aileron or rudder (left direction), and the
maximum amount of ‘up’ movement for aileron is indicated in
percentage. Please check the sensitivity of the selected
direction and then pres jog dial to conrm the changes.
18. When changing only “R/D” (Right/Down) sensitivity,
use the jog dial to select “R/D (Right/Down) and press to
conrm the selection.
19. With using the jog dial, you may increase (clockwise) or
decrease (counter-clockwise) the sensitivity near the neutral
position. “R/D” setting is to x the direction of the servo from
neutral position for aileron or rudder (right direction),
and the maximum amount of ‘down’ movement for aileron
is indicated in percentage. Please check the sensitivity of the
selected direction and then pres jog dial to conrm the changes.
20. Press the back button twice to return to the D/R & EXP menu.
21. scroll to highlight the “OST” and press the jog dial to activate
the menu.
22. With using the jog dial, you may increase (clockwise) or
decrease (counter-clockwise) the value for oset.
Please check the tuned value and then pres jog dial to conrm
the changes.
23. Press the back button twice to return to the D/R & EXP menu.
The on-screen graph provides real-time feedback regarding how your D/R & EXP inputs aect
servo movement. Note that the y-axis of the graph moves as you manipulate the relevant
control stick for the current function being edited.
TipTip
Tip
Offset(OST)
Exponential Rate cont.

HITEC Flash 8 Specifications

General

Interface	-
Input type	Press buttons
Product color	Black, Silver
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	8 channels

Weight and Dimensions

Weight	- g