HITEC Flash 8 User Manual

104 105
T. Curve cont.
6. Scroll to the “2” eld and press the jog button to activate
the menu.
7. Rotate the jog dial to set the Y axis value and press the jog dial
to conrm your input
8. Rotate the jog dial to set the X axis value and press the jog dial
to conrm your input
9. Set the above 4~8 step again depending on dierent throttle
stick position
10. Scroll to the “EXP” (exponential) eld and press the jog
button to activate the menu.
11. Rotate the jog dial to select “OFF” or “ON”. When “ON” is
selected, the points in the curve are connected with
exponential curves. Otherwise, the points are joined linearly.
Press the jog dial to conrm your selection.
12. Scroll to the “OST” eld and press the jog button to activate
the menu.
13. Rotate the jog dial to set the increase/decrease of Oset for
tail pitch value and press the jog dial to conrm your input
14. Scroll to the “SW” eld and press the jog button to activate
the menu
15. Please select switch which control the function and press the
jog button to conrm
a. If you choose “NULL” this mixing will be activate all the time
b. If you choose switch
- Depending on switch position, “0”,”1” or “2” will be showed
on the Upper right eld of the menu display
16. Scroll to the “HOVER” eld and press the jog button to
activate the menu
17. Rotate the jog dial to set the digital trim for Throttle Curve
when hovering. Press the jog button to conrm
T. Curve cont.
20. Press the back button to return to the model function menu.
To disable the throttle curve:
1. Scroll to highlight the “MIX” eld in the throttle curve menu
and press the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to conrm your
selection.
3. Press the Back button to return to the model function menu.
You may also select a ight condition in this menu by activating the desired ight condition.
P. Curve
The Pitch Curve function allows you to modify the normally-linear servo rate movement for collective
pitch by dening ve dierent points along the pitch response curve. It is necessary to manipulate
the pitch curve in conjunction with the throttle curve to achieve maximum performance from your
helicopter.
To congure a pitch curve:
1. From the model menu, rotate the jog dial to highlight
“P.Curve” and press the jog dial once to enter the activation
menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to conrm your selection and activate the pitch curve
menu.
TipTip
Tip
18. Choose the “RATE” by using the jog dial and scroll the range
of digital trim. Press the jog dial to conrm it.
19. Set up accordance with Flight Condition
- The upper right eld of the menu displays which ight
condition is currently active.
- Scroll to the ight condition eld and press the jog dial to
activate the menu.
- Choose the desired ight condition and press the jog dial to
conrm your selection.

HITEC Flash 8 Specifications

General

Interface	-
Input type	Press buttons
Product color	Black, Silver
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	8 channels

Weight and Dimensions

Weight	- g