SAFETY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 31
Tischkreissäge / table saw TS 200 / TS 250
12 SAFETY
12.1 Intended use
The machine only in technically perfect condition in accordance with, safety and danger, use it! In-
terference, which could affect safety, must be rectified immediately!
It is generally prohibited to modify safety equipment of the machine or to make ineffective!
The Table saw TS 200/250 is exclusively for cutting wood-based materials
(solid, particle board, veneer, etc.) determined.
For a different or additional use and resulting damage or injury takes HOLZMANN
MASCHINEN no responsibility or warranty.
2. Working conditons
The machine is designed for the work under the following conditions:
humidity max. 70%
temperature +5°С to +40°С +41°F to +104°F
The machine is not intended for outdoor use.
The machine is not intended for use in potentially hazardous conditions.
12.2 Prohibited use
The operation of the machine under conditions outside of the limits, given in these instruc-
tions is not permitted.
The operation of the machine without the safety devices provided is inadmissible
The removal or turning off the protection devices is prohibited
It is not permitted processing of materials with dimensions outside the limits specified in this
manual.
It is not permitted the use of tools that are not for use with TS 200 / 250 are suitable.
The operation of the machine on a way or for any purpose that does not comply with the in-
structions of this manual to 100%, is prohibited.
Do not leave the machine unattended, especially when children are not around. DO NOT
LEAVE the workplace!
For a different or additional use and resulting property damage or injury takes
HOLZMANN-MASCHINEN no responsibility or warranty.
12.3 General Safety
To avoid malfunctions, damage and physical injury MUST be observed:
Safety must be observed and regularly inspected for completeness!
Warning signs and / or labels on the machine which have been removed must be
replaced immediately!
To Next Page
Loading...
