Honda BF90D - Trailering

114
Do not trailer or transport the boat
with the motor in the tilted position.
The boat or motor could be
severely damaged if the motor
drops.
Trailering
(H type)
(R type)
TRANSPORTING
OUTBOARD MOTOR STAND
STEERING FRICTION
ADJUSTING KNOB
The motor should be trailered in the
normal running position. If there is
insufficient road clearance in this
position, then trailer the motor in the
tilted position using a motor support
device such as a transom saver bar, or
remove the motor from the boat.Secure the outboard motor on a
outboard motor stand with the
mounting bolts and nuts.
Remove the hoist hook and
reinstall the engine cover.
When trailering or transporting the
boat with the motor attached, it is
rec ommended that the motor rema in
in normal running position with the
steering friction adjusting knob
tightened securely.
When trailering or transporting the
boat with the motor attached, it is
rec ommended that the motor rema in
in normal running position.
3.
4.