〈〉
4.2
(4.4 US qt , 3.7 Imp qt)
4.4
(4.6 US qt , 3.9 Imp qt)
…when oil filter is not replaced
…when oil filter is replaced
120
Engine Oil
Oil change interval:
Oil capacity:
Engine Oil Replacement
Recommended Oil:
MAINTENANCE
OIL FILLER CAP
DRAIN BOLT
SEALING WASHER
GUIDE
Insufficient or contaminated engine
oil adve rsely affects the servic e life
of the sliding and moving parts.
20 operating hours after the date of
purchase or first month for initial
replacement, then every 100
operating hours or 6 months.
Drain the oil while the engine is still
warm to assure rapid and complete
draining.
SAE 10W-30 engine oil or
equivalent, API Service classification
SG, SH or SJ.
Position the outboard motor
vertic ally, and remove the engine
cover. Remove the oil filler cap
(see page ).
Place a suitable container under
the guide.
Remove the engine oil drain bolt
and sealing washer using the 12
mm wrench and drain the engine
oil.
Install a new sealing washer and
drain bolt and tighten bolt securely.
1.
2.
3.
54
To Next Page
Loading...
