Honeywell ESSER Fire Alarm Control Panel Compact User Manual

Fire Alarm Control Panel Compact
10 FB 798238.GB0 / 10.14
3.1 Access authorisation
Keyboard entry is inhibited during normal operation. Access is only possible at access level 2.
ESSER
by Honeywell
28.06.2012 12:00:00
Compact
Fig. 7: Display during normal operation of the FACP
Press key and enter the code for access level 2.
Access level 3 (installer level)
Only qualified staff may make changes, settings or enter data at this access level. An incorrect setting or data
entry can impair the function of the FACP.
1 information
2 overview
3 operate
4 enter access level 3
main menu
2 2
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXY Z
ESC 0 CLR
Selection by entering digits 1-4.
Fig. 8: Service menu
code entry
code: ****
To enable, enter the access code (which must not exceed 8
digits) and then confirm by pressing the
key.
Fig. 9: Entry of access code
Access code for keyboard enable at the installer level
The numeric code for access level 3 (installer level) set by the factory is listed in the following table.
This code should be changed after the installation technician has finished commissioning and the new code
should be entered in the table.
123 factory default setting for access level 3 (no more than 8 digits)

Honeywell ESSER Fire Alarm Control Panel Compact Specifications

General

Brand	Honeywell
Model	ESSER Fire Alarm Control Panel Compact
Category	Fire Alarms
Language	English