Honeywell ESSER Fire Alarm Control Panel Compact User Manual

Fire Alarm Control Panel Compact
46 FB 798238.GB0 / 10.14
10 Templates
The factory settings for the fire alarm control panel and the available templates are given in the tables on the
following pages.
The settings and templates can be changed and adjusted to suit the object. If the fire alarm control
panel is reset to the factory settings, all changes are discarded and the original data is reloaded.
Factory settings
Factory settings
Text
TYPE
Trigger/switching
function
Monitoring
IN_1
Feedback input ATU Fault ATU triggered
IN_2
Fault ATU System input
IN_3
FPE triggered System input FPE triggered
IN_4
FPE fault System input FPE fault
OUT1
Main detector ATU Panel state fire Calibrate
OUT2
Fault ATU General Panel state fault Calibrate
OUT3
Acoustic alarm device Acoustics Panel state fire EOL-O
OUT4
Strobe General Panel state fire EOL-O
REL_1
FPE FPE Panel state FPE triggered
REL_2
FSKB fire General Panel state fire
REL_3
FSKB ATU triggered General Panel state ATU triggered
REL_4
Reset external detector General FACP reset
REL_5
RS485
FIP/FOP
Construction site commissioning
Construction site
Text
TYPE
Trigger/switching
function
Monitoring
IN_1
Feedback input ATU System input ATU triggered
IN_2
Fault ATU Fault
IN_3
FPE triggered System input FPE triggered
IN_4
FPE fault System input FPE fault
OUT1
Main detector ATU
OUT2
Fault ATU General Panel state fault
OUT3
Acoustic alarm device Acoustics Panel state fire
OUT4
Strobe General Panel state fire
REL_1
FPE FPE Panel state FPE triggered
REL_2
Common fire General Panel state fire
REL_3
Technical alarm General Panel state ATU triggered
REL_4
Common fire General FACP reset
REL_5
RS485
Not in use

Honeywell ESSER Fire Alarm Control Panel Compact Specifications

General

Brand	Honeywell
Model	ESSER Fire Alarm Control Panel Compact
Category	Fire Alarms
Language	English