Honeywell Excel 50 User Manual

EXCEL 50 MMI - USER GUIDE
EN2B-0222GE51 R0216 6
NOTE: The two-digit CPU field (in the upper right-hand corner), the date, and
the time will be editable only if you are already in access level 3 (see
section "Access Levels" on page 6).
NOTE: The "Logout" edit field will appear only if you are already in access level
2 or 3 (see section "Access Levels" on page 6).
Selecting the "Password" field will take you to the password procedure (see
section "Password Procedure" on page 6).
Access Levels
The use of three access levels ensures that only authorized personnel can
read/edit sensitive system data. In order to enter access level 1, no password is
necessary, and only those screens accessible at that level will be displayed (see
also Table 2). In order to enter access levels 2 and 3, a corresponding password
must be entered.
Table 2. Access Levels and Corresponding Authorizations
access
level
PLANTS key
( )
TIME PROGRAMS
key ( )
SYSTEM TOPICS
key ( )
ALARMS key
( )
1 read only read only no effect read only
2 read only time schedules no effect read only
3 unlimited editing possible read only
NOTE: In the following sections, the password procedure will not be repeated.
Refer back to this section for guidance on entering the password.
IMPORTANT
If you have forgotten the level-3 password, please contact your local
Honeywell branch.
Password Procedure
Upon selecting the "Password" field, the following screen will appear (see Fig. 5
on page 7).

Honeywell Excel 50 Specifications

General

Brand	Honeywell
Model	Excel 50
Category	Controller
Language	English