EXCEL 50 MMI - USER GUIDE
37 EN2B-0222GE51 R0216
Resetting the Modem
If you wish to return modem to factory settings, select "Reset Modem".
NOTE: Resetting the modem will restore the factory defaults and erase any
custom initialization.
NOTE: You must ensure first that the modem is connected. See section
"Remote Communications" of the Excel 50 Controller Installation
Instructions, EN1B-101, for more information.
Flash EPROM
Selecting "Flash EPROM." will cause a listbox with a corresponding heading to
appear (see Fig. 53).
Fig. 53. Hardware-interface configuration screens
Regardless of your application or configuration, this listbox will always contain the
same three items from which to choose.
By selecting "Save Applic." you can burn all data of the current application
into the Flash EPROM.
By selecting "Erase Flash", you can erase all data from the Flash EPROM.
By selecting "Show Applic.", you can display saved applications and their
respective burn dates.
Saving the Application
If "Save Applic." is selected, the following screen will appear (see Fig. 54).
To Next Page
Loading...
Need help?
General
