www.honeywell.com/security
122 | Performance Series Network Video Recorder User Guide
1. Click Add Group or Modify Group in the ACCOUNT configuration interface. The Add
Group or Modify Group configuration interface opens.
Figure 3-66 Add Group Configuration Interface
2. Enter a group Name. Entering Memo information is optional.
3. Click to enable privileges in the list. There are 60 from which to choose.
4. Click Save to save the new settings.
Adding or Modifying a User
The procedures for adding a user and modifying a user are similar. The Add User configuration
interface is shown in this example.
1. Click Add User or Modify User in the ACCOUNT configuration interface. The Add User
or Modify User configuration interface opens.
To Next Page
Loading...