www.honeywell.com/security
116 | Performance Series Full PoE Network Video Recorder User Guide
Configuring Alarm Outputs
To configure alarm outputs
1. Go to Main Menu > SETTING > EVENT > ALARM OUTPUT.
Figure 8-14 Alarm Output Configuration Tab
2. On the Alarm Output page, set the alarm type for each alarm output:
3. To turn off triggered alarm outputs, next to Alarm Release, click OK.
4. Click Apply to save your changes, and then click OK.
•Schedule
Select the alarm output(s) that you want to apply the recording
schedule settings to. For more details, see Configuring the Video
Recording Schedule on page 63 and Configuring the Snapshot
Recording Schedule on page 64.
• Manual
Select the alarm output(s) that you want to enable for all channels.
•Stop
Select the alarm output(s) that you want to disable for all channels.
To Next Page
Loading...
Need help?
General
