Configuring Camera Settings | 77
800-21090V2 - A - 03/2016
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click OK.
Configuring Camera Settings
Note You can configure camera settings only if you have connected your IP cameras
via a Private Protocol. If you have connected via a Private Protocol, then the
Camera settings will be available. If you have connected your IP cameras via
other protocols, then the Camera settings will not be available.
To configure a camera’s settings
1. In the SETTING field in the Main Menu, go to REMOTE > Video&Audio > Camera.
Figure 6-2 Camera Settings Tab
2. Configure the following settings:
•Channel Select a channel from the drop-down list.
To Next Page
Loading...
Need help?
General
