Viewing Live Video | 57
800-21090V2 - A - 03/2016
Configuring PTZ Patterns
You can record a series of PTZ movements as a pattern. When you call the pattern in live view
mode, the PTZ camera automatically moves along the path you have defined.
To program a pattern
1. On the expanded PTZ control panel, click the Pattern button.
2. In the Pattern box, enter a number for the pattern.
3. Click Start, and then use the direction arrows to direct the camera.
4. When you have finished directing the camera, click End.
To Next Page
Loading...
Need help?
General
