www.honeywell.com/security
44 | Performance Series Full PoE Network Video Recorder User Guide
Setting Up Bi-Directional Communication Connection
Audio Output Device to a PC
Connect:
1. Connect a microphone or pickup to the first audio input port on the NVR’s rear panel.
2. Connect the earphone or the sound box to the audio output port on your PC.
3. Open the web client and log in.
4. Enable the desired channel in the web client’s live view monitor.
Figure 2-9 Enabling Bi-Directional Communication
Configuring to Hear Audio From the NVR
At the NVR end, speak through the microphone or the pickup. Then you can get the audio from
the speaker or earphone from the PC end.
Figure 2-10 Configuring to Hear Audio from the NVR
PC to an Audio Input Device
Connect:
1. Connect the microphone or the pickup to the audio input port in the PC.
2. Connect the earphone or the sound box to the audio output port on your PC.
3. Open web client and log in.
4. Enable the desired channel in the web client’s live view monitor.
5. See Figure 2-9 for enabling bi-directional communication.
To Next Page
Loading...
Need help?
General
