www.honeywell.com/security
126 | Performance Series Full PoE Network Video Recorder User Guide
Figure 10-1 General Configuration Tab
2. On the General tab, configure the following settings:
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click Save.
• Device Name
Enter a device name for the NVR.
• Device No.
Enter a device number for the NVR.
• Language
Set the language of the user interface.
• Video Standard
Set the video standard to
NTSC
or
PAL
.
• HDD Full
Set to
Overwrite
to continue recording when the HDD is full. Set to
Stop Record
to stop recording when the HDD is full. The default
setting is
Overwrite
.
•Pack Duration
Set the recording duration. Specify a time between
1
and
60
minutes.
The default setting is
60
min
.
•Realtime Play
Set the length of time to play back video using the realtime playback
function in live view mode. Specify a time between
5
and
60
minutes.
The default setting is
5 min
.
• Auto Logout
Set the length of time the NVR waits before logging out an inactive
user. Specify a time between
0
and
60
minutes. The default setting
is
10 min
.
• Navigation Bar
Select the check box to display the live view toolbar on the live view
screen. Clear the check box to hide the live view toolbar.
• Startup Wizard
Select the check box to display the
Startup Wizard
at startup. Clear
the check box to bypass the Startup Wizard at startup.
•Mouse
Sensitivity
Set the desired mouse speed using the slider.
To Next Page
Loading...
