Honeywell HEN04112 - Network and Storage Specifications; Auxiliary Interface and Electrical Specifications

www.honeywell.com/security
174 | Performance Series Full PoE Network Video Recorder User Guide
Recording Interval 1 to 120 minutes (default: 60 minutes); Pre-recording: 1 to 30
seconds
Video Detection and Alarms
Trigger Events Recording; Tour; Alarm; Email; FTP; Buzzer; Screen Tips
Video Detection Motion Detection; Motion Detection Zones (396: 22 x 18);
Video Loss and Camera Blank
Alarm Input 4 channels
Relay Output 2 channels
Playback and Backup
Sync Playback 4-channel NVRs: 1/4
8-channel NVRs: 1/4/9
16-channel NVRs: 1/4/9/16
Search Mode Time/Date; Alarm; Motion Detection; Exact Search (accurate
to a second)
Playback Function Play; Pause; Stop; Rewind; Fast play; Slow Play; Full Screen;
Backup Selection
Backup Mode
Compatibility
USB Device; Network
Network
Ethernet 1 RJ-45 port (10/100/1000Mbps)
PoE 4-channel NVRs: 4 ports (IEEE802.3af)
8-channel NVRs: 8 ports (IEEE802.3at/af)
16-channel NVRs: 16 ports (IEEE802.3at/af)
Network Function HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP,
DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP
Search
Maximum number of
users
20 users
Smart Phone
compatibility
iOS; Android
Storage
Internal Storage 2 SATA ports: up to 12 TB; RAID (redundancy)
Auxiliary Interface
USB 2 ports: USB 3.0 on rear panel; USB 2.0 on front panel
RS232 1 port, for PC communication and keyboard
RS485 1 port, not supported
Electrical
4-channel NVRs Power
Supply
NVR: 12 V DC; 4 A external adaptor
PoE: 48 V DC; 1.04 A external adaptor
Table D-1 Specifications