www.honeywell.com/security
8 | Performance Series Full PoE Network Video Recorder User Guide
Be sure to have the model number, serial number, and the nature of the problem available for the technical service
representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to Honeywell without a
clearly identified Return Merchandise Authorization (RMA) number may be refused.
List of Symbols
The following is a list of symbols that might appear on the NVR.
Table 1-1 List of Symbols
Symbol Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to
discard this product, it must be sent to separate collection
facilities for recovery and recycling. By separating this product
from other household-type waste, the volume of waste sent to
incinerators or landfills will be reduced, and thus natural
resources will be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is
listed by the Underwriters Laboratories.
The FCC compliance logo.
This logo indicates that the product conforms to Federal
Communication’s Commission compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the
product is direct current.
The alternating current symbol.
This symbol indicates that the power input/output for the
product is alternating current.
The LDPE symbol.
This symbol indicates that this product is made of
Low-Density Polyethylene (LDPE).
The Direct Current symbol.
This symbol indicates that the product operates from a 12 V
direct current.
To Next Page
Loading...
