Honeywell oneWireless XYR 6000 - Bracket mounting

2. Transmitter Mounting
Bracket mounting
18 OneWireless XYR 6000 Transmitters Quick Start Guide Revision 12
February 2013
2.6 Bracket mounting
Attach bracket to pipe
Figure 2-7 shows some commonly used bracket and pipe orientations. Not all possibilities are shown; you
can use any bracket (flat or angle) and orientation (parallel or transverse) to get the desired transmitter
positioning.
Position bracket on 2-inch (50.8 mm) pipe and install “U” bolt around pipe and through holes in bracket.
Secure with nuts and lockwashers provided.
B
E
F
C
D
A
Figure 2-7 Common bracket orientations