Honeywell oneWireless XYR 6000 - Wiring for Calibration - XYR6000 Universal I;O Wiring Diagrams for AI;DI (Model STUW700)

3. Process Insertion
Universal I/O
30 OneWireless XYR 6000 Transmitters Quick Start Guide Revision 12
February 2013
Wiring for calibration – XYR6000 Universal I/O Wiring Diagrams for AI/DI (Model STUW700)
PV1 Possible Connections
T/C, DI or HLAI
PV2 Possible Connections
T/C, DI or HLAI
PV3 Possible Connections
(HLAI only)
Note: any combination of the above are allowed.
For example: PV1 is a DI, PV2 is 4-20mA, PV3 is 0-20mA.
Or PV1 is 0-20mA, PV2 is a T/C, PV3 is 0-20mA