Process Insertion
Pressure models
Revision 12 OneWireless XYR 6000 Transmitters Quick Start Guide 25
February 2013
Process connections
Table 3-1 Process connections
Transmitter Type Process Connection
Differential Pressure
Process heads with ¼ inch NPT female connection
Flange adapters and manifolds with ½ inch female connection are optional
Gauge Pressure
Process head with ½ inch NPT female connection
In-line ½ inch NPT female connection
In-line ½ inch NPT male
9/16 High Pressure
DIN19213n
Process heads with ¼ inch NPT female connection
Flange adapters and manifolds with ½ inch female connections are
optional
Absolute Pressure
Process head with ½ inch NPT female connection
In-line ½-inch NPT male
9/16 High Pressure
DIN19213n
Flush or Extended Flange
Mount
ASME 2” 150# ¹ Serrated-face flange with 4 holes 19 mm (3/4”) diameter
on 120,7 mm (4.75”) bolt circle and an outside diameter of 150 mm (5.91”)
ASME 2” 300# ¹ Serrated-face flange with 8 holes 19 mm (3/4”) diameter
on 127 mm (5.00”) bolt circle and an outside diameter of 165 mm (6.50”)
ASME 3” 150# ¹ Serrated-face flange with 4 holes 19 mm (3/4”) diameter
on 152,4 (6.00”) bolt circle and an outside diameter of 190 mm (7.48”)
ASME 3” 300# ¹ Serrated-face flange with 8 holes 22 mm (7/8”) diameter
on 168,3 mm (6.63”) bolt circle and an outside diameter of 210 mm (8.27”)
ASME 4” 150# ¹ Serrated-face flange with 8 holes 19 mm (3/4”) diameter
on 190,5 mm (7.48”) bolt circle and an outside diameter of 230 mm (9.06”)
ASME 4” 300# ¹ Serrated-face flange with 8 holes 22 mm (7/8”) diameter
on 200 mm (7.87”) bolt circle and an outside diameter of 255 mm (10.04”)
DN 50 PN 40 ² Serrated-face flange with 4 holes 18 mm (.71”) diameter on
a 125 mm (4.92”) bolt circle and an outside diameter of 165 mm (6.50”)
DN 80 PN 40 ² Serrated-face flange with 8 holes 18 mm (.71”) diameter on
a 160 mm (6.30”) bolt circle and an outside diameter of 200 mm (7.87”)
DN 100 PN 40 ² Serrated-face flange with 8 holes 22 mm (.87”) diameter
on a 190 mm (7.48”) bolt circle and an outside diameter of 235 mm (9.25”)
Pseudo Flange Mount
ASME 2” 150# ¹ Serrated-face flange with 4 holes 19 mm (3/4”) diameter
on 120,7 mm (4.75”) bolt circle and an outside diameter of 150 mm (5.91”)
ASME 3” 150# ¹ Serrated-face flange with 4 holes 19 mm (3/4”) diameter
on 152,4 (6.00”) bolt circle and an outside diameter of 190 mm (7.48”)
Remote Diaphragm Seals
See Model Selection Guide for description of available Flanged, Threaded,
Chemical Tee, Saddle and Sanitary process connections.
1
Dimensions of bolt circle and serrated gasket face conform to ASME B 16.5
2
Dimensions of bolt circle and serrated gasket face conform to EN 1092
To Next Page
Loading...
