Start up
Display sequence
Revision 12 OneWireless XYR 6000 Transmitters Quick Start Guide 53
February 2013
5.2 Display sequence
After power up, the transmitter does a brief self-test of the LCD display. Then it proceeds to Power-On
Message, which is the model name of the transmitter. The name is displayed for 2 seconds after which the
transmitter displays the process variables and associated status.
5.3 Provisioning
Before the transmitter can be configured it must be unlocked with a security key so it can join the network.
Use the Provisioning Device Pocket PC software to receive security keys from the Key Server manager,
then aim the Pocket PC at the transmitter and transmit a key.
Transmitters in the OneWireless Network with R210 release software can be provisioned using over-the-
air provisioning.
The Wireless Device Manager (WDM) provisions the access points, and the access points that are enabled
to function as provisioning devices can then provision the transmitters. To enable the over-the-air
provisioning capability, you must first enable this feature in the Onewireless User Interface. For more
information, please reference the OW R210 Wireless Device Manager User’s Guide (OW-CC0020).
See Getting Started with Honeywell OneWireless Solutions for more information.
To Next Page
Loading...
