Honeywell oneWireless XYR 6000 - Attach Transmitter to Bracket; Table 2-7 Bracket Attacment

Transmitter Mounting
Bracket mounting
Revision 12 OneWireless XYR 6000 Transmitters Quick Start Guide 19
February 2013
Attach transmitter to bracket
Align appropriate mounting holes in transmitter with holes in bracket and secure the transmitter to the
bracket with bolts and washers provided.
If the meter body is hexagonal, you must use the additional bracket supplied. If meter body is round,
discard the bracket.
Table 2-7 Bracket Attacment
Transmitter type Attachment to bracket Example
DP type with double-ended
process heads and/or remote
seals
Alternate mounting holes
in end of heads.
A
B
C
Dual head GP
Mounting holes in end of
process head
In-line GP and AP (LGP
model)
Smaller “U” bolt.
A
B
C
D
Temperature/DI Smaller “U” bolt.
Multiple DI Smaller “U” bolt.
High Level Analog Input Smaller “U” bolt.
Corrosion Smaller “U” bolt.
Universal I/O Smaller “U” bolt.
In flush flange, extended flange and pseudo flange pressure transmitter applications, the transmitter bolts
directly to the process connection (tank spud) and no bracket is required.