Antenna adjustment and mounting
Remote antenna
Revision 12 OneWireless XYR 6000 Transmitters Quick Start Guide 43
February 2013
Step Action
10
When attaching the coax cable to the XYR 6000, it is recommended that a drip loop with a
radius of at least 12 inches (30 cm) be formed close to the XYR 6000. This will minimize ice
and water buildup on the transmitter itself. Tighten cables by hand only; do not use tools or you
could overtighten.
To lightning
arrestor & antenna
12”/30cm
Drip loop
To Next Page
Loading...
