9 - 33
Don’t Require Coupon Code: If you have selected Require Coupon Code, and you want to disable this feature, scan
Don’t Require Coupon Code. UPC-A bar codes are transmitted, depending on the setting you are using for UPC-A/EAN-
13 with Extended Coupon Code.
Default = Don’t Require Coupon Code.
UPC-A Number System 5 Addenda Required
This setting programs the scanner to require any combination of a coupon code, a 2 digit addenda, or a 5 digit addenda on
UPC-A bar codes that begin with a “5.” The following settings can be programmed:
Require Coupon Code/Addenda: All UPC-A bar codes that begin with a “5” must have a coupon code, a 2 digit addenda,
a 5 digit addenda, or a combination of these addenda. The UPC-A bar code with the coupon code and/or addenda is then
transmitted as a single, concatenated bar code. If a coupon code and/or required addenda is not found within the Addenda
Timeout period, the UPC-A bar code is discarded.
Don’t Require Coupon Code/Addenda: If you have selected Require Coupon Code/Addenda, and you want to disable
this feature, scan Don’t Require Coupon Code/Addenda. UPC-A bar codes are transmitted, depending on the setting
you are using for UPC-A/EAN-13 with Extended Coupon Code.
Default = Don’t Require Coupon Code/Addenda.
* Don’t Require Coupon Code
* Don’t Require Coupon Code/
Addenda
Require 2 or 5 Digit Addenda
To Next Page
Loading...
