9 - 36
Redundancy
Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number of
errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. If you are having difficulty
reading poor quality in-store bar codes, you may wish to scan a higher Redundancy bar code below to improve the read
rate. Default = Redundancy Off.
UPC/EAN Security
This feature allows you to increase the security when reading UPC and EAN bar codes. For lesser quality bar codes, you may
wish to increase the security settings to improve the read rate. Default = Medium.
To Next Page
Loading...
