Honeywell Stratos 2700 - Host System Plug and Play Codes; Rs485

3 - 6
Host System Plug and Play Codes
RS485
Scan one of the following “Plug and Play” codes to program the scanner for an IBM POS terminal interface at address 4B.
Note: After scanning one of these codes, you must power cycle the cash register.
Each bar code above also programs the following suffixes for each symbology:
* Suffixes programmed for Code 128 with IBM 4683 Port 5B, IBM 4683 Port 9B HHBCR-1, and IBM 4683 Port 17 Interfaces
Symbology Suffix Symbology Suffix
EAN 8 0C Code 39 00 0A 0B
EAN 13 16 Interleaved 2 of 5 00 0D 0B
UPC A 0D Code 128 * 00 0A 0B
UPC E 0A Code 128 ** 00 18 0B
MaxiCode 00 2F 0B
Motor/Beeper Power Save
Combined Power Save Modes
IBM Port 5B Interface
IBM Port 9B
HHBCR-1 Interface
IBM Port 9B
HHBCR-2 Interface
IBM Port 17 Interface