3 - 4
USB Serial Commands
USB Serial Emulation
Scan the following code to program the scanner to emulate a regular RS232-based COM Port. If you are using a Mic-
rosoft® Windows® PC, you will need to download a driver from the Honeywell website (www.honeywellaidc.com). The
driver will use the next available COM Port number. Apple® Macintosh computers recognize the scanner as a USB
CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
USB Serial Emulation for
Windows XP, Windows Server
2003, and later
USB Serial Emulation for Windows 2000
To Next Page
Loading...
